Bộ 3 Khối Silicone Bọc Bảo Vệ Phụ Kiện Máy In 3d Mk8 0.4mm Cr-10, 10s, S4, S5
0 Đánh Giá
3 Đã Bán
63
41.000 đ
Xem sản phẩm trên ShopeeQuốc tế
chủ nhật 11/07/2021 lúc 06:11 SA
Material: Made of a heat-resistant, non-stick silicone material, rather than molten plastic.This really helps with sticky materials like co-polyesters and filled-composite materials that like to build up on nozzles.
Temperature Range: We suggest highest safe temperature resistance is about 230℃-250℃/ 446℉-482℉.
Features: Will keep your heater block clean and free from burnt and blackened plastic.Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print.
Instructions for Use: The covers simply push onto the front of the Hot End with no disassembly - they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly.
MK8 nozzles: material:brass,thread type: M6,output diameter:0.4mm;Input filament diameter:1.75mm,Compatible with 3D printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, and fit for all 1.75 mm PLA ABS 3D printer,supported:ABS/PLA/PETG/Carbon Fiber
Color: Blue & yellow
Material: Silicone + Brass
MK8 Silicone Cover:
Suitable for heat block size: 20 x 20 x 10mm
Package Contents:
3 * MK8 Silicone Sock (Blue)
3 * MK8 Brass NozzleOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Temperature Range: We suggest highest safe temperature resistance is about 230℃-250℃/ 446℉-482℉.
Features: Will keep your heater block clean and free from burnt and blackened plastic.Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print.
Instructions for Use: The covers simply push onto the front of the Hot End with no disassembly - they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly.
MK8 nozzles: material:brass,thread type: M6,output diameter:0.4mm;Input filament diameter:1.75mm,Compatible with 3D printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, and fit for all 1.75 mm PLA ABS 3D printer,supported:ABS/PLA/PETG/Carbon Fiber
Color: Blue & yellow
Material: Silicone + Brass
MK8 Silicone Cover:
Suitable for heat block size: 20 x 20 x 10mm
Package Contents:
3 * MK8 Silicone Sock (Blue)
3 * MK8 Brass NozzleOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.