Bộ 8 Miếng Dán Tản Nhiệt Bằng Đồng Cho Laptop
0 Đánh Giá
0 Đã Bán
29
85.800 đ
Xem sản phẩm trên ShopeeQuốc tế
thứ ba 10/08/2021 lúc 07:34 SA
Dear, welcome to myhomever, here is the latest season's products, you are welcome to choose the purchase, we will give you the best service experience, I wish you a happy day ~ for product details, please go down to see ~
8X Adhesive Sticker Copper Heatsink Laptop PC RAM Memory Motherboard Chip Heat Sink Cooler Radiator
Features:
Made of pure copper, excellent heat dissipation effect.
Can also be applied to motherboards, graphics cards, sound cards and other chips.
(Note: The chip size must be no smaller than the heat sink.)
Specification:
Material: Pure Copper
Size: 22 X 8 X 5mm/0.87 X 0.31 X 0.2"
Quantity: 8pcs
Installation Attention:
1. Detect the chip/video memory/memory particle size and determine that it is smaller than the product specification.
2. Attach a single double-sided sticker to the back of the heat sink.
3. Remove the film on the bottom of the product and attach it to the chip/display memory/memory particles. Because the heat sink is made of metal, Do not touch the surrounding IC (integrated circuit) during installation.
4. After moving or vibrating the machine, please check that the heat sink is completely attached to the chip/video memory/memory particles.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3mm measuring deviation due to manual measurement.
Included:
8 X Copper Heatsinks
8X Adhesive Sticker Copper Heatsink Laptop PC RAM Memory Motherboard Chip Heat Sink Cooler Radiator
Features:
Made of pure copper, excellent heat dissipation effect.
Can also be applied to motherboards, graphics cards, sound cards and other chips.
(Note: The chip size must be no smaller than the heat sink.)
Specification:
Material: Pure Copper
Size: 22 X 8 X 5mm/0.87 X 0.31 X 0.2"
Quantity: 8pcs
Installation Attention:
1. Detect the chip/video memory/memory particle size and determine that it is smaller than the product specification.
2. Attach a single double-sided sticker to the back of the heat sink.
3. Remove the film on the bottom of the product and attach it to the chip/display memory/memory particles. Because the heat sink is made of metal, Do not touch the surrounding IC (integrated circuit) during installation.
4. After moving or vibrating the machine, please check that the heat sink is completely attached to the chip/video memory/memory particles.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3mm measuring deviation due to manual measurement.
Included:
8 X Copper Heatsinks