Cáp Chuyển Đổi Pci-E Riser Card 1x Sang 16x 30cm Cho Btc Riser
0 Đánh Giá
0 Đã Bán
49
158.000 đ
Xem sản phẩm trên ShopeeQuốc tế
thứ năm 29/04/2021 lúc 12:05 CH
1. The graphics card power supply uses three FP solid s to make the graphics card power supply more stable and safe.
2. The adapter card has a 6pin or large 4PIN interface to strengthen the power supply, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.
3. The graphics card slot adopts the original imported connector to make the graphics card contact better.
4. The PCI-E connector uses multi-layer shielded wire, which can be connected up to 3Meter without signal attenuation.
5. The cable is relatively soft and easy to route. If you want to put the graphics card, put it there.
The PCI-E connector plug is fully gold-plated, which is more wear-resistant and increases conductivity.
The slot is equipped with a fixed buckle, which is convenient to remove and fix the graphics card, so that the graphics card will not fall off from the slot.
Product scope and purpose:
1. Product application: new design, 1X, 2X, 4X, 8X, 16X compatible (1-16X and 16-16X can be used), the circuit board PCIe adapter is newly released, safer, more efficient, and more practical!
2. Purpose: Soe the problems of traditional flat cable solder joints that are fragile and easy to burn, transmission signal attenuation, and insufficient cable length. Choose the latest PCIe conversion line, all these problems are soed! The laptop or graphics card of the interface is connected to a monitor or TV with an HDMI port.
Features: 4pin/6pin dual power supply
colour: blue
Material: PCB
size: 123x32x15mm
Package Contents:
1 x PCI-E Riser Card
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2. The adapter card has a 6pin or large 4PIN interface to strengthen the power supply, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.
3. The graphics card slot adopts the original imported connector to make the graphics card contact better.
4. The PCI-E connector uses multi-layer shielded wire, which can be connected up to 3Meter without signal attenuation.
5. The cable is relatively soft and easy to route. If you want to put the graphics card, put it there.
The PCI-E connector plug is fully gold-plated, which is more wear-resistant and increases conductivity.
The slot is equipped with a fixed buckle, which is convenient to remove and fix the graphics card, so that the graphics card will not fall off from the slot.
Product scope and purpose:
1. Product application: new design, 1X, 2X, 4X, 8X, 16X compatible (1-16X and 16-16X can be used), the circuit board PCIe adapter is newly released, safer, more efficient, and more practical!
2. Purpose: Soe the problems of traditional flat cable solder joints that are fragile and easy to burn, transmission signal attenuation, and insufficient cable length. Choose the latest PCIe conversion line, all these problems are soed! The laptop or graphics card of the interface is connected to a monitor or TV with an HDMI port.
Features: 4pin/6pin dual power supply
colour: blue
Material: PCB
size: 123x32x15mm
Package Contents:
1 x PCI-E Riser Card
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.