Vòi Phun Và 4 Đầu Phun Cho Máy In 3d J-Head E3D V5 V6 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm
0 Đánh Giá
0 Đã Bán
56
71.000 đ
Xem sản phẩm trên ShopeeQuốc tế
chủ nhật 23/05/2021 lúc 04:44 CH
Compliant all M6 thread 3D printer:The nozzles used M6 thread,same as MK8 MK7 UM2 CR10 etc.
Special tools:special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy!
HOW TO REPLACEMENT NOZZLE:Step 1:Turn on 3D Printer,set nozzle temperature to target (PLA:80-220,ABS:240-280).Step 2:After heat done,use SPANNER to hold heat block,use Socket screwdriver to screw old nozzle out.old nozzle will be very hot,don't Press by hands!
Step 3:Put new nozzle to this socket screwdriver,spanner keep to hold heat block,screw nozzle in,must be tight and it is done.Notice:NOZZLE and Heat Block on 3D printer need heat before take out,don't Press it by hands when printer is heading or close less than 10 mins.
Color:gold + sier + red
material:metal
Package Contents:
1pcs * 0.2mm extruder nozzle
1pcs * 0.3mm extruder nozzle
2pcs * 0.4mm extruder nozzle
1pcs * 0.5mm extruder nozzle
1pcs * 0.6mm extruder nozzle
1pcs * 0.8mm extruder nozzle
1pcs * Simple spanner
1pcs * 3 in 1 screwdriver(1 Handle with 2 Heads)Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Special tools:special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy!
HOW TO REPLACEMENT NOZZLE:Step 1:Turn on 3D Printer,set nozzle temperature to target (PLA:80-220,ABS:240-280).Step 2:After heat done,use SPANNER to hold heat block,use Socket screwdriver to screw old nozzle out.old nozzle will be very hot,don't Press by hands!
Step 3:Put new nozzle to this socket screwdriver,spanner keep to hold heat block,screw nozzle in,must be tight and it is done.Notice:NOZZLE and Heat Block on 3D printer need heat before take out,don't Press it by hands when printer is heading or close less than 10 mins.
Color:gold + sier + red
material:metal
Package Contents:
1pcs * 0.2mm extruder nozzle
1pcs * 0.3mm extruder nozzle
2pcs * 0.4mm extruder nozzle
1pcs * 0.5mm extruder nozzle
1pcs * 0.6mm extruder nozzle
1pcs * 0.8mm extruder nozzle
1pcs * Simple spanner
1pcs * 3 in 1 screwdriver(1 Handle with 2 Heads)Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.